10G SFP Optical Module
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Guangdong
-
Validity to:
Long-term effective
-
Last update:
2020-04-10 13:42
-
Browse the number:
155
+
- Contactaixin:
siygtx(Mr.)
- Email: telephone: phone:
-
Arrea:
Guangdong
Address:6F Block B, HongLianYin Science and Technology Park, GuangLan LongHua, ShenZhen, China
- Website:
+
Digital Diagnostic Functions
SOPTIC’s SFP+10G-ZR transceivers is 1550nm cooled EML laser and APD photo-detector receiver based 10Gigabit SFP+ transceiver, which is designed to transmit and receive optical data over single mode optical fiber for link length up to 80km.Digital diagnostics functions are available via a 2-wire serial interface, as specified in the SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
Product Features
10Gb/s serial optical interface compliant to 802.3ae 10GBASE-ZR
1550nm Cooled EML APD Receiver
Up to 80km on 9/125um SMF
SFP+ MSA package with duplex LC connector
SFI High Speed Electrical Interface
Very Low EMI and excellent ESD protection
+3.3V power supply
Case operating temperature range: -5°C to 70°C
2-wire interface for management and diagnostic monitor
Power dissipation < 1.5W
Applications
10GBASE-ZR/ZW
10G Fiber Channel
10G storage system
Absolute Maximum Ratings
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Ref |
Maximum Supply Voltage |
Vcc |
-0.5 |
4.0 |
V |
||
Storage Temperature |
Ts |
-40 |
85 |
°C |
||
Case Operating Temperature |
Tcase |
-5 |
70 |
°C |
||
Operating Relative Humidity |
RH |
85 |
% |
|||
Receiver Damage Threshold |
6 |
dBm |
Electrical Characteristics(Tcase=-5 to 70°C,VCC=3.13 TO 3.47 Volts)
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Ref |
Supply Voltage |
Vcc |
3.13 |
3.47 |
V |
||
Supply Current |
Icc |
450 |
mA |
|||
Module total power |
P |
1.5 |
W |
1 |
||
Transmitter | ||||||
Input differential impedance |
Rin |
100 |
Ω |
1 |
||
Single ended data input swing |
Vin,pp |
300 |
1200 |
mV |
||
Transmit Disable Voltage |
VD |
2.0 |
Vcc |
V |
||
Transmit Enable Voltage |
VEN |
GND |
GND+0.8 |
V |
||
Transmit Disable Assert Time |
10 |
us |
||||
Receiver |
||||||
Differential data output swing |
Vout-pp |
500 |
650 |
800 |
mV |
2 |
Data output rise time |
Tr |
30 |
Ps |
3 |
||
Data output fall time |
Tf |
30 |
Ps |
4 |
||
LOS Fault |
VLOS fault |
2 |
VccHOST |
V |
4 |
|
LOS Normal |
VLOS nor |
GND |
GND+0.8 |
V |
4 |
Notes:
1. Connected directly to TX data input pins. AC coupled thereafter.
2. Input 100 ohms differential termination.
3. These are unfiltered 20 – 80 % Values .
4. Los is an open collector output , should be pulled-up with 4.7KΩ-10 k Ω on the host board. Normal Operation is logic 0 , loss of signal is 1 .
Optical Characteristics (Top=-5 to 70 °C,VCC=3.13 to 3.45 Vlots)
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Ref |
Transmitter |
||||||
Average optical power |
Pave |
0 |
5 |
1 |
||
Optical Wavelength |
λ |
1530 |
1550 |
1565 |
nm |
|
Average launch power of off transmitter |
Poff |
-40 |
dBm |
|||
Optical Extinction Ratio |
ER |
6 |
dB |
|||
Transmitter Dispersion Penalty |
TDP |
3 |
dB |
|||
Side mode Supression Ratio |
SMSR |
30 |
dB |
|||
Relative Intensity Noise |
RIN |
-128 |
dB/Hz |
|||
Output Eye Mask |
Compliant with IEEE 0802.3ae |
|||||
Receiver | ||||||
Receiver Sensitivity |
Rsens |
-23 |
dBm |
2 |
||
Input Saturation Power (Overload) |
PAST |
-7 |
dBm |
|||
Wavelength Range |
λC |
1260 |
1600 |
Nm |
||
LOS De -Assert |
LOSD |
-24 |
dBm |
|||
LOS Assert |
LOSA |
-32 |
dBm |
|||
LOS Hysteresis |
0.5 |
4 |
dB |
Notes:
1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured with conformance test signal for BER = 10^–12.@10.3125Gbps, PRBS=2^31-1,NRZ
General Specifications
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Ref |
Bit rate |
BR |
10.3125 |
1 |
|||
Bit error ratio |
BER |
|
2 |
|||
Maximum supported distances |
Lmax |
80 |
Km |
3 |
Notes :
1. 10GBASE-ZR/ZW
2. Tested with a 231 – 1 PRBS
3. SMF fiber, 1550nm wavelength
Soptic of SFP Optical Transceivers are hot-swappable, compact media connectors that provide instant fiber connectivity for your networking gear. They are a cost effective way to connect a single network device to a wide variety of fiber cable distances and types.
By eliminating the need to maintain surplus units/ devices of various fiber types for network repairs or upgrades Small Form Pluggable Optical Transceivers reduce network equipment inventories. SFPs allow one product the flexibility to expand by speed (Fast Ethernet and 1, 10, or 40 Gigabit), and/or distance (220 m to 80 km).
Network upgrades are also made easier because SFPs are interchangeable fiber connectors that can adapt to any existing network. For example, by simply replacing the pluggable optical transceiver, a media converter that was originally used in a multimode network can be re-configured to operate over a CWDM network.
http://www.sopticom.com/