TitleProduct

C Band Single Output LNB

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Jiangsu

  • Validity to:

    Long-term effective

  • Last update:

    2019-10-26 08:05

  • Browse the number:

    380

Send an inquiries
+
WeiYe Intelligent Equipment(Danyang) Co.,Ltd
Contactaixin:

lnbfactory(Mr.)  

Email:

telephone:

phone:

Arrea:

Jiangsu

Address:

No.88 Qiliang North Road, Dan Yang, Jiangsu Province-212300, China

Website:

http://www.wslnbf.com/ http://lnbfactory.chuangweiyn.com/

+

Model

GS-C18T1

Input Frequency

3.7-4.2GHz

L.O. Frequency

5.15GHz ± 1MHz

Stability

± 1MHz(-40 ℃ - +70 ℃)

Output Frequency

950-1450 MHz

Conversion Gain

60 dB (TYP)

L.O. Phase Noise

-55 dBc/Hz@1KHz

-85 dBc/Hz@10KHz

-105 dBc/Hz@100KHz

Gain Flatness

±0.5dB/36 MHz

Noise Figure

13°K

Image Rejection

45dB

Dc Supply Voltage

10-20V

Supply Current

<150mA

Operating Temperature

-40 ℃ ~ +70 ℃

IF Output Connector

“F” Type Female

Output Impedance

75 OHMS

Product  Feature

In order to ensure sufficient gain, the lC Band Single Output LNB consists of four-stage amplification or five-stage amplification. By appropriately selecting the operating points of each stage, the purpose of low noise and high gain can be achieved. The first two stages of amplifying circuits are designed according to low noise requirements, and the operating current is relatively small, while the latter two stages are designed according to high gain requirements, and the operating current is relatively large. 


Product Description

The C Band Single Output LNB is provided with a coupling device between the rectangular band, which converts the electromagnetic wave energy propagating inside the waveguide into a current. In addition, the electrical coupling method is to place a metal probe in a rectangular waveguide. The probe is parallel to the narrow side of the rectangular waveguide. It represents the polarization direction of the high frequency head. The probe generates current under the excitation of the electric field. The magnetic coupling method is a small metal ring is placed in the rectangular waveguide, the normal direction of the ring is perpendicular to the electric field in the waveguide, and the small ring generates an induced current under the excitation of the magnetic field. The microwave transistors used in low noise amplifiers are gallium arsenide field effect transistors or high electron mobility transistors, which are characterized by low noise and high operating frequency.



http://www.wslnbf.com/